Freego  High-Tech  Corporation Limited
+86-755-8331 5079
+86-138 2740 9865
sales@Freegochina.com
Certifications
Dtswiss
Contact us
Freego High-tech Corporation Limited
Tel: +86-755-8331 5079
Cell phone: +86-138 2740 9865 (for urgent)
CEO: Kevin@FreegoChina.cn
Sales Dept.: Sales@FreegoChina.cn
Website: http://www.FreegoChina.com 
Contact Now
News
Your position:Home > News > Industry News > Two shilly-car failure analysi.....

Two shilly-car failure analysis and solutions


Common faults are the following:
   1, the wheel is out of balance, stand up will take the chaos out of control.
2, the wheel does not work unilaterally. Red light flash.
3, on both sides of the wheel is not working. Red light flash.
Failure analysis Failure analysis Failure analysis two-wheeled self-balancing shilly-car / drift car and two-wheeled self-balancing solution shilly-car / drift car and two-wheeled self-balancing solution shilly-car / drift car and solutions
A :( battery direction) Motor power line it has three different colored lines, poor contact or disconnect any one, here the motor will lose balance, or driving when there is abnormal sound. Any two points is bad or disconnected, the motor will not work here. Tip lights do not flash.
B :( battery direction) Hall line consists of five different colors, thin constitution. Arbitrary or disconnect a cable connection is bad, it will cause both sides of the motors are not working. Tip lamp flashes 5 times each.
C: Deputy board cable line is the set of four different colored lines, poor contact or disconnection, the motor will not work on both sides, with light can work, cue lights flashed every time.
D and F: with light cable is bad or disconnected, with lamp is not working.
E: Battery warning lamp is bad or disconnected cable, battery prompt lamp is not working.
G: Deputy board cable line is the set of four different colored lines, poor contact or disconnection, the motor will not work on both sides, with light can work, cue lights do not flash.
H :( switching direction) Hall line consists of five different colors, thin constitution. Arbitrary or disconnect a cable connection is bad, it will cause both sides of the motors are not working. Tip lights flash every 4 under.
I :( switching direction) Motor power line has three different colored lines, poor contact or disconnect any one, here the motor will lose balance, or driving when there is abnormal sound. Any two points is bad or disconnected, the motor will not work here. Tip lights do not flash.
J: Charging port to connect or disconnect the cable connection is bad, it will not charge.
K: switch cable is bad or disconnected, switch button will fail.
L: Tip lamp cable is bad or disconnected, the warning lamp is not working.
Over cable problem, simply re-plug or replace the cable can be solved.
Tip lamp Instruction Description: Flash 1: C partial failure flash 2 times: No flash 3 times: Motor short-circuit fault flash four times: H partial failure flash 5 times: B partial failure flashes 6 times: battery failure Flash 7: Battery direction of the auxiliary circuit board failure, we need to replace the circuit board flash 8 times: switching direction auxiliary circuit board failure, you need to replace the circuit board.
Here is how to correct the drift car balanced approach to solve!
Drift car motor balance errors, difficult to control, or both sides of the motor imbalance.
1. Off 2. the car flat, both sides of the balance wheel ground 3. Press the power button for 10 seconds or until the warning lamp flashes.
4. Wait a few seconds to reboot.
About Freego|Products|Contact Us|Download|Request A Quote|News|Gallery|Site map|Distributors